LayR-Multi Timbral Synthesizer1.52 - App Store
You'll be able to see results in few seconds.
Publisher Description
LayR is a massively polyphonic, multi-timbral synthesizer for iOS devices, optimized for modern 64 bit CPUs and capable of delivering up to 256 voices of rich, multi-layered and textured sounds.
LayR's primary sound components are called Performances where a Performance is a set of Instruments and each Instrument is a set of Layers and each Layer is a complete synthesizer. A performance can consist of any number of instruments each with its own MIDI channel and crossfading keyboard span. Each Instrument can consist of any number of Layers to a maximum of 128.
Each Layer has a dual oscillator that can morph with modulation between two shapes and phase states, two rich and warm state variable filters, a wave folder and a mixing section to blend oscillators and filters in any serial/parallel combination.
For modulation (frequency, amplitude and phase) there are two Low Frequency Oscillators ranging from DC to audio frequency switchable to optionally follow keyboard pitch and restart phase when a note is started. Two loopable ADSR envelopes ranging from fractions of a second to over 100 seconds, an amplitude ADSR and a random number generator with a smoothing filter. With stereo delay, reverb and EQ on the output section LayR excels at not only emulating normal analog synth sounds but also at creating massive pads and huge spacy ambient textures with extremely long evolution cycles.
Focused at keyboard players looking for a mobile synth that can be reliably used live on stage LayR is equally at home in the studio. An extensive selection of usable instrument and performance presets are included which can be loaded using MIDI bank select and program change messages in the same manner as hardware synths.
LayR sports almost unparalled and extremely flexible MIDI control. Every parameter in the synth engine can be assigned to any MIDI Control Change number and parameters spread across multiple Layers can be grouped and controlled by a single MIDI cc with assignable range and direction.
There is also an 8 track, 16 step Arpeggio Sequencer which can be used to create all sorts of exciting polyrhythmic looped patterns or even ambient generative music. Each track can have it's own speed, playback mode and length.
On top of all that LayR has a MIDI Controller Mixer that can be used during performance to control the synth engine in real time and can also transmit MIDI cc's from LayR's output port to other destinations.
Full IAA, Audiobus, Audio Unit and Link compatibility means LayR can be used with all hosts and other music apps on iOS and desktop DAWs.
Version History General maintenance and fixing a potential race condition at startup. 1.52 Apr 17 Fixing some issues with catalyst on Tahoe.
Added more helpful startup text to explain where to find presets on first launch.
Keyboard scroll bar is more visible.
Adjusted default view size on Catalyst. 1.51 Jan 8 LayR is now updated to run on Mac via Catalyst. 1.5 10/19/2025 Maintenance build for iOS 18 1.47 12/22/2024 1.46:
This is a maintenance update to ensure compatibility with the most recent compilers.
Also fixes a few issues including …
- Minimum iOS deployment target raised from 9.0 to 12.0 (XCode requirement)
- Implemented some minor future proofing by replacing code that called into recently deprecated system functions .
- Fixed dragging on keyboard MIDI channel selector was not working correctly. 1.46 06/04/2023 - Fix: A workaround for some hosts that don’t provide correct sample rate until very late in initialisation process.
- Fix: A silly “typo” bug where LayR was returning a spurious error from its render block resulting in no audio in some hosts. 1.45 01/18/2021 - minor optimisations.
- implemented support for mouse pointer.
- minor bug fixes 1.44 12/18/2020 Fixes issue on iPhone where text labels in settings view were not visible. 1.43 03/04/2020 - Fixed: Cause of intermittent crash when audio unit is ejected in host. 1.42 02/17/2020 - Fixed: Unused output buffers were not cleared and could cause a buzzing noise.
- Fixed: Could not save preset if name only had one character. 1.41 02/16/2020 v1.4 release notes
- New: A new Multi-out Audio Unit!! (same configuration as IAA version)
- New: Added the 12 Macro controls to AUv3 automation parameter tree.
- Fixed: Crash on iOS 13 when selecting MIDI over Bluetooth for the first time.
- Fixed: Incorrect width for Middle C chooser in Settings panel.
- Fixed keyboard view redrawn too often
- Fixed: Per AU settings (Performance channel & Bend range) not persisting.
- Fixed: some annoying colour clashes with system colour theme on iOS 13.
- CHANGED for AU & IAA: If LayR’s multi out option is set to “FX only”, LayR will now route all audio to the stereo/main output iff all Instruments are routed to main. That is if no instruments are routed to outputs 1-8 then the entire mix is played though the stereo out regardless of the “FX Out” settings. 1.4 02/13/2020 Minor update: LayR standalone now supports bluetooth speakers/headphones if iOS has a bluetooth audio destination selected. 1.3.3 11/13/2019 - Fixes a velocity issue when restarting polyphonic voices.
- Addresses a backward compatibility issue with some older Arpeggio Sequencer presets and the recent change to the envelope. 1.3.2 04/25/2019 v1.3.1
- A new "Hold" mode for the Arpeggiator, the old hold mode is now called "Latch".
As long as at least one note is held down on the keyboard or via MIDI any other notes played will be added to the held chord.
When all notes are released the chord continues to play until another chord or note is played.
This makes it possible to play a chord on the keyboard and then change the key or sequence by playing another chord.
All existing presets will load and play as before in Latch mode.
- Added a new parameter editing panel in the editor: The "Dial Strip", see Link & Assign section in manual.
Dial Strip pops up a line of dials, one for the same parameter in every layer.
Use the strip to edit parameters in other layers and set links between parameters.
- Added view insets for devices without home buttons.
- Added an “Invert” button for Unipolar FM in the oscillator. This inverts the polarity of unipolar modulation.
- Added a button to the Editor menu bar to choose between Link Assign/Dial Strip or none.
- Fixed audio unit crash when host requests large buffer sizes.
- Fixed: Fixed character filtering that replaces some unusable characters from preset names before saving.
- Fixed: Voices with long attacks and long releases are no longer (incorrectly) restarted from the wrong level.
- Settings View: Performance MIDI channel selector is now greyed out if option is disabled.
- Some minor DSP engine optimisations.
- Updated Manual with new features in v1.3.1 1.3.1 03/15/2019 Changes:
- Macro Control Panel: A new panel that lets you change assigned synth parameters globally across an entire performance.
- Link Assign Panel now has an extra section for assigning Layer parameters to Macro controls.
- You can now assign any MIDI controller to Instrument Volume Sliders. ( defaults to cc 7 ).
- Load Preset panel now updates it’s selection if a MIDI bank or program change is received while it’s visible.
- New option in settings: Don’t Start Voices When Volume is Zero: Prevents voices being started if Instrument or Layer volumes are zero.
- New option in settings: “Multi Out: FX Only in Stereo Output”, converts the IAA Stereo Mix output to an effects return if any of the 8 aux audio outputs are in use.
- Dials will now always show at least 1 degree of coloured arc unless their value is equal to zero.
- Increased fall time for peak hold metering in master strip.
- Updated PDF manual.
Bug Fixes:
- Fixed a common crash during audio unit initialisation.
- Fixed crash when long pressing on A to B range buttons.
- Fixed: Potential crash when saving performances if poly aftertouch is assigned.
- Fixed: Audio Unit now respects all persistent preferences set in the IAA app.
- Fixed an audio spike when an AU is loaded in a certain state from a host. Could cause a loud reverb explosion.
- Fixes a rare problem where an AU host could start to load a preset before the Audio Unit had completed initialisation.
- Fixed: Current bank is now properly set when selecting a bank in the load preset panel.
- Fixed a state where MIDI controller values for the CC Mixer would fail to be loaded from a saved preset.
- Fixed: UI crash when tapping on AB-Range modifier tempo button after previously setting time to maximum ( 100s ). 1.3 07/20/2018 - Fixes a crash when resizing the audio unit view in Auria Pro.
- Addresses an issue where audio outputs in the IAA version would disconnect when using more than one output. 1.2.4 05/31/2018 Improved stability while disconnecting and connecting multiple IAA audio outputs in various hosts. 1.2.3 05/22/2018 - Fixes an issue where LayR could occasionally stop working after several minutes playing in an IAA host.
- Audio Unit keyboard no longer moves slightly when using bend or mod sliders
- Show a confirmation alert before importing a bank file over an existing bank. 1.2.2 05/10/2018 - Fixes an issue that caused LayR to crash during initialisation in some Audio Unit hosts. 1.2.1 04/23/2018 GENERAL:
- Audio Unit v3.
- New App Icon.
- New look for User Interface.
- PDF Manual ( please read it! ).
- An optional "Light" colour scheme.
- More new presets!
AUDIO UNIT:
- Zoomable, scrollable editor.
- Shortcut buttons to quickly zoom to locations in the Layer Editor.
- Presets shared between instances and with stand-alone app.
NEW MIDI CC MIXER:
- A slider strip for each chanel groups Instrument levels while maintaining relative volumes.
- A slider for every MIDI controller assigned in the current Performance.
- Slider strips can renamed or hidden from the mixer panel.
- Query which instrument/layer/dial any MIDI controllers have been assigned to in the current Performance.
- Optionally transmit CCs to the MIDI output port.
LAYER EDITOR:
- Clearly labelled controls.
- Double tap or pinch on the background to zoom the UI.
- New Mod Matrix for routing modulation sources to any destination.
- New Oscillator mode providing coarse/fine tuning and improved FM with a much greater range.
- New "Fixed" oscillator mode to decouple the oscillator from MIDI notes.
- New "Sync" mode for LFOs keeps LFOs in all playing voices synced to the same phase.
- Dials: Increased accuracy and threshold between vertical and horizontal tracking (coarse/fine).
ARPEGGIO SEQUENCER:
- Every track can now have it's own mode, length and speed.
- New Playback Types.
- New Event Types.
- Copy/Paste/Clear tracks (long press on track).
- New "Hold" button, the sustain pedal is no longer used to hold arpeggiator notes.
DRAG & DROP IN INSTRUMENT MIXER PANEL (iOS 11 only):
- Drag and drop Instrument Strips to rearrange order.
- Drag and drop Instrument Strips to copy into or merge with another Instrument.
- Drag and drop Layer Strips to rearrange order within an instrument
- Drag and drop Layer Strips to the mixer background to create a new instrument with that Layer
- Drag and drop Layer Strips to other Instruments to make a copy in the destination Instrument.
PRESET FILING:
- Easier Import/Export for presets.
- Bank Files: A new file type for importing and exporting entire banks of presets to Files etc.
- Banks and programs can now be deleted/cleared.
MIDI: ( See manual )
- A new MIDI input port for live "Performance" bank/program select using any channel. (optional)
- Option to use either MSB or MSB for bank select.
MISC:
- Optional "expert level" swipe shortcuts to open or close various panels.
- Performance "Append…" has been fixed, you can now append multiple performance programs to the currently loaded performance.
- Reverb is now silenced when changing presets.
- “Fold” amount in Filter 2 is now adjusted downwards as key notes go up, reducing aliasing artefacts as notes get higher.
- An Optional "Legacy Mode" to maintain compatibility with older devices
+ various minor bug fixes and more! 1.2 04/19/2018 Fixes unresponsive touch at bottom of screen on iOS 11. 1.1.0 11/21/2017 Fixes a couple of iPhone X issues
- Contents and Exit buttons in Help view were not visible on iPhone X
- Contracted keyboard icon was in wrong position on iPhone X. 1.0.9 11/10/2017 - Fixes a potential crash after receiving a MIDI program change.
- Adds Polyphonic Aftertouch to the list of available MIDI controllers.
This minor release is primarily about fixing the crash after receiving a MIDI program change bug, but we managed to sneak in Polyphonic Aftertouch too …
Polyphonic Aftertouch is now available at the top of the list of controllers in the MIDI assign view.
The list of controllers is now circular, that is it will loop around from maximum to minimum, this saves lots of scrolling and dragging with your finger to get to the top of list. 1.0.8 10/10/2017 Version 1.0.7
200+ new INSTRUMENT presets from Brice.
A brand new Wave Folding distortion effect inserted between the 2 filters.
( Wave Folder is only active when Filter 2 has input from Filter 1 )
A new performance bank with a few Wave Folder demo presets.
New MIDI activity indicators added to Instrument views.
(The arrows on the MIDI transpose control now flash when MIDI is received.)
New Voice Activity indicators added to all Mixer Strips.
(Blue lights indicate voices are active for the Instrument or Layer.)
Added Mod and Pitch Bend controls to the keyboard.
Added a “dark mode” for the keyboard:
(The dark option can be set in the key edit view.)
Added an “Initialise” button in the Load Preset views.
(Resets instrument or performance to default settings.)
Added an “Add Layer” button to Layer Strips in Performance view.
Tapping on the host button in IAA transport now switches directly to the host app.
In some IAA hosts LayR will now appear in it’s own “Living Memory” category.
Added copy & paste filter1 to filter2 and vice-versa in the layer clipboards.
(To access clipboard on iPad, long-press on the editor background).
Instrument & Layer: Increased transpose limit from 36 to 72.
Renamed LayR’s main mix output to “LayR Main Stereo”.
Fixed: Instrument MIDI bank number incorrectly reset after loading an instrument.
Fixed: Tapping on the keyboard MIDI channel to enter channel number. 1.0.7 10/05/2017 Fixes a potential crash when saving presets. 1.0.6 08/01/2017
About LayR-Multi Timbral Synthesizer
The company that develops LayR-Multi Timbral Synthesizer is Living Memory Software. The latest version released by its developer is 1.52.
To install LayR-Multi Timbral Synthesizer on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the LayR-Multi Timbral Synthesizer as malware if the download link is broken.
How to install LayR-Multi Timbral Synthesizer on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the LayR-Multi Timbral Synthesizer is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After LayR-Multi Timbral Synthesizer is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.52
posted on 2026-10-14
Version History General maintenance and fixing a potential race condition at startup. 1.52 Apr 17 Fixing some issues with catalyst on Tahoe.
Added more helpful startup text to explain where to find presets on first launch.
Keyboard scroll bar is more visible.
Adjusted default view size on Catalyst. 1.51 Jan 8 LayR is now updated to run on Mac via Catalyst. 1.5 10/19/2025 Maintenance build for iOS 18 1.47 12/22/2024 1.46:
This is a maintenance update to ensure compatibility with the most recent compilers.
Also fixes a few issues including …
- Minimum iOS deployment target raised from 9.0 to 12.0 (XCode requirement)
- Implemented some minor future proofing by replacing code that called into recently deprecated system functions .
- Fixed dragging on keyboard MIDI channel selector was not working correctly. 1.46 06/04/2023 - Fix: A workaround for some hosts that don’t provide correct sample rate until very late in initialisation process.
- Fix: A silly “typo” bug where LayR was returning a spurious error from its render block resulting in no audio in some hosts. 1.45 01/18/2021 - minor optimisations.
- implemented support for mouse pointer.
- minor bug fixes 1.44 12/18/2020 Fixes issue on iPhone where text labels in settings view were not visible. 1.43 03/04/2020 - Fixed: Cause of intermittent crash when audio unit is ejected in host. 1.42 02/17/2020 - Fixed: Unused output buffers were not cleared and could cause a buzzing noise.
- Fixed: Could not save preset if name only had one character. 1.41 02/16/2020 v1.4 release notes
- New: A new Multi-out Audio Unit!! (same configuration as IAA version)
- New: Added the 12 Macro controls to AUv3 automation parameter tree.
- Fixed: Crash on iOS 13 when selecting MIDI over Bluetooth for the first time.
- Fixed: Incorrect width for Middle C chooser in Settings panel.
- Fixed keyboard view redrawn too often
- Fixed: Per AU settings (Performance channel & Bend range) not persisting.
- Fixed: some annoying colour clashes with system colour theme on iOS 13.
- CHANGED for AU & IAA: If LayR’s multi out option is set to “FX only”, LayR will now route all audio to the stereo/main output iff all Instruments are routed to main. That is if no instruments are routed to outputs 1-8 then the entire mix is played though the stereo out regardless of the “FX Out” settings. 1.4 02/13/2020 Minor update: LayR standalone now supports bluetooth speakers/headphones if iOS has a bluetooth audio destination selected. 1.3.3 11/13/2019 - Fixes a velocity issue when restarting polyphonic voices.
- Addresses a backward compatibility issue with some older Arpeggio Sequencer presets and the recent change to the envelope. 1.3.2 04/25/2019 v1.3.1
- A new "Hold" mode for the Arpeggiator, the old hold mode is now called "Latch".
As long as at least one note is held down on the keyboard or via MIDI any other notes played will be added to the held chord.
When all notes are released the chord continues to play until another chord or note is played.
This makes it possible to play a chord on the keyboard and then change the key or sequence by playing another chord.
All existing presets will load and play as before in Latch mode.
- Added a new parameter editing panel in the editor: The "Dial Strip", see Link & Assign section in manual.
Dial Strip pops up a line of dials, one for the same parameter in every layer.
Use the strip to edit parameters in other layers and set links between parameters.
- Added view insets for devices without home buttons.
- Added an “Invert” button for Unipolar FM in the oscillator. This inverts the polarity of unipolar modulation.
- Added a button to the Editor menu bar to choose between Link Assign/Dial Strip or none.
- Fixed audio unit crash when host requests large buffer sizes.
- Fixed: Fixed character filtering that replaces some unusable characters from preset names before saving.
- Fixed: Voices with long attacks and long releases are no longer (incorrectly) restarted from the wrong level.
- Settings View: Performance MIDI channel selector is now greyed out if option is disabled.
- Some minor DSP engine optimisations.
- Updated Manual with new features in v1.3.1 1.3.1 03/15/2019 Changes:
- Macro Control Panel: A new panel that lets you change assigned synth parameters globally across an entire performance.
- Link Assign Panel now has an extra section for assigning Layer parameters to Macro controls.
- You can now assign any MIDI controller to Instrument Volume Sliders. ( defaults to cc 7 ).
- Load Preset panel now updates it’s selection if a MIDI bank or program change is received while it’s visible.
- New option in settings: Don’t Start Voices When Volume is Zero: Prevents voices being started if Instrument or Layer volumes are zero.
- New option in settings: “Multi Out: FX Only in Stereo Output”, converts the IAA Stereo Mix output to an effects return if any of the 8 aux audio outputs are in use.
- Dials will now always show at least 1 degree of coloured arc unless their value is equal to zero.
- Increased fall time for peak hold metering in master strip.
- Updated PDF manual.
Bug Fixes:
- Fixed a common crash during audio unit initialisation.
- Fixed crash when long pressing on A to B range buttons.
- Fixed: Potential crash when saving performances if poly aftertouch is assigned.
- Fixed: Audio Unit now respects all persistent preferences set in the IAA app.
- Fixed an audio spike when an AU is loaded in a certain state from a host. Could cause a loud reverb explosion.
- Fixes a rare problem where an AU host could start to load a preset before the Audio Unit had completed initialisation.
- Fixed: Current bank is now properly set when selecting a bank in the load preset panel.
- Fixed a state where MIDI controller values for the CC Mixer would fail to be loaded from a saved preset.
- Fixed: UI crash when tapping on AB-Range modifier tempo button after previously setting time to maximum ( 100s ). 1.3 07/20/2018 - Fixes a crash when resizing the audio unit view in Auria Pro.
- Addresses an issue where audio outputs in the IAA version would disconnect when using more than one output. 1.2.4 05/31/2018 Improved stability while disconnecting and connecting multiple IAA audio outputs in various hosts. 1.2.3 05/22/2018 - Fixes an issue where LayR could occasionally stop working after several minutes playing in an IAA host.
- Audio Unit keyboard no longer moves slightly when using bend or mod sliders
- Show a confirmation alert before importing a bank file over an existing bank. 1.2.2 05/10/2018 - Fixes an issue that caused LayR to crash during initialisation in some Audio Unit hosts. 1.2.1 04/23/2018 GENERAL:
- Audio Unit v3.
- New App Icon.
- New look for User Interface.
- PDF Manual ( please read it! ).
- An optional "Light" colour scheme.
- More new presets!
AUDIO UNIT:
- Zoomable, scrollable editor.
- Shortcut buttons to quickly zoom to locations in the Layer Editor.
- Presets shared between instances and with stand-alone app.
NEW MIDI CC MIXER:
- A slider strip for each chanel groups Instrument levels while maintaining relative volumes.
- A slider for every MIDI controller assigned in the current Performance.
- Slider strips can renamed or hidden from the mixer panel.
- Query which instrument/layer/dial any MIDI controllers have been assigned to in the current Performance.
- Optionally transmit CCs to the MIDI output port.
LAYER EDITOR:
- Clearly labelled controls.
- Double tap or pinch on the background to zoom the UI.
- New Mod Matrix for routing modulation sources to any destination.
- New Oscillator mode providing coarse/fine tuning and improved FM with a much greater range.
- New "Fixed" oscillator mode to decouple the oscillator from MIDI notes.
- New "Sync" mode for LFOs keeps LFOs in all playing voices synced to the same phase.
- Dials: Increased accuracy and threshold between vertical and horizontal tracking (coarse/fine).
ARPEGGIO SEQUENCER:
- Every track can now have it's own mode, length and speed.
- New Playback Types.
- New Event Types.
- Copy/Paste/Clear tracks (long press on track).
- New "Hold" button, the sustain pedal is no longer used to hold arpeggiator notes.
DRAG & DROP IN INSTRUMENT MIXER PANEL (iOS 11 only):
- Drag and drop Instrument Strips to rearrange order.
- Drag and drop Instrument Strips to copy into or merge with another Instrument.
- Drag and drop Layer Strips to rearrange order within an instrument
- Drag and drop Layer Strips to the mixer background to create a new instrument with that Layer
- Drag and drop Layer Strips to other Instruments to make a copy in the destination Instrument.
PRESET FILING:
- Easier Import/Export for presets.
- Bank Files: A new file type for importing and exporting entire banks of presets to Files etc.
- Banks and programs can now be deleted/cleared.
MIDI: ( See manual )
- A new MIDI input port for live "Performance" bank/program select using any channel. (optional)
- Option to use either MSB or MSB for bank select.
MISC:
- Optional "expert level" swipe shortcuts to open or close various panels.
- Performance "Append…" has been fixed, you can now append multiple performance programs to the currently loaded performance.
- Reverb is now silenced when changing presets.
- “Fold” amount in Filter 2 is now adjusted downwards as key notes go up, reducing aliasing artefacts as notes get higher.
- An Optional "Legacy Mode" to maintain compatibility with older devices
+ various minor bug fixes and more! 1.2 04/19/2018 Fixes unresponsive touch at bottom of screen on iOS 11. 1.1.0 11/21/2017 Fixes a couple of iPhone X issues
- Contents and Exit buttons in Help view were not visible on iPhone X
- Contracted keyboard icon was in wrong position on iPhone X. 1.0.9 11/10/2017 - Fixes a potential crash after receiving a MIDI program change.
- Adds Polyphonic Aftertouch to the list of available MIDI controllers.
This minor release is primarily about fixing the crash after receiving a MIDI program change bug, but we managed to sneak in Polyphonic Aftertouch too …
Polyphonic Aftertouch is now available at the top of the list of controllers in the MIDI assign view.
The list of controllers is now circular, that is it will loop around from maximum to minimum, this saves lots of scrolling and dragging with your finger to get to the top of list. 1.0.8 10/10/2017 Version 1.0.7
200+ new INSTRUMENT presets from Brice.
A brand new Wave Folding distortion effect inserted between the 2 filters.
( Wave Folder is only active when Filter 2 has input from Filter 1 )
A new performance bank with a few Wave Folder demo presets.
New MIDI activity indicators added to Instrument views.
(The arrows on the MIDI transpose control now flash when MIDI is received.)
New Voice Activity indicators added to all Mixer Strips.
(Blue lights indicate voices are active for the Instrument or Layer.)
Added Mod and Pitch Bend controls to the keyboard.
Added a “dark mode” for the keyboard:
(The dark option can be set in the key edit view.)
Added an “Initialise” button in the Load Preset views.
(Resets instrument or performance to default settings.)
Added an “Add Layer” button to Layer Strips in Performance view.
Tapping on the host button in IAA transport now switches directly to the host app.
In some IAA hosts LayR will now appear in it’s own “Living Memory” category.
Added copy & paste filter1 to filter2 and vice-versa in the layer clipboards.
(To access clipboard on iPad, long-press on the editor background).
Instrument & Layer: Increased transpose limit from 36 to 72.
Renamed LayR’s main mix output to “LayR Main Stereo”.
Fixed: Instrument MIDI bank number incorrectly reset after loading an instrument.
Fixed: Tapping on the keyboard MIDI channel to enter channel number. 1.0.7 10/05/2017 Fixes a potential crash when saving presets. 1.0.6 08/01/2017
Disclaimer
Official App Store Link
We do not host LayR-Multi Timbral Synthesizer on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for LayR-Multi Timbral Synthesizer is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.